1. Home
  2. Aluminum Railing
  3. Guideline for Weld Joint — Fabricated Aluminum

Guideline for Weld Joint — Fabricated Aluminum

Aluminum

  • Components to be welded must have a Class 1″ or “Special cosmetic classification prior to acceptance of Customer Purchase Order.
  • Specifications are as follows:

Class 1
Smooth Weld Appearance

Filler will be added so no under-cut will be present. Welds will have 5/16-1/2″. Chevrons will be visible. This weld can be polished smooth if necessary.

Updated on June 12, 2018

Was this article helpful?

Related Articles

Leave a Comment