Product Tips & Information

Porosity is a normal attribute of cast products. Every effort is made to minimize the appearance of porosity but minor...

The Kee Klamp Fitting The simple but effective engineering principle of the Kee Klamp Fitting is the foundation of the most...

INTERNA-RAIL®: Interna-Rail is uniquely designed for easy assembly and superior strength. The all-mechanical assembly requires no welding. TEE CONNECTIONS: Interna-Rail’s...

WARNING: Due to the expansion properties of Rockite do not use Rockite for anchoring in cement that is narrow on...

AAC — Aluminum Anodizers Council ABANA — The Artist-Blacksmith’s Association of North America ADA — Department of Justice Americans With Disabilities Act home...

Proven the best mechanical splice available for pipe and tubular railing field joints.  Splice-Locks are most effective as a joint...

View our selection of Snap-On Cover Flanges and Bases  

Environmental Sustainability Statement The Wagner Companies – an ISO 9001:2015 Certified company – has been in the metal business since...

For years, protecting steel from corrosion typically involved either the use of hot-dip galvanizing or some type of paint system....

View Allowable Stress, Minimum Yield and Modulus of Elasticity for Aluminum, Bronze, Stainless Steel and Steel. Material Allowable Stress (psi)...

One of the most confusing terms in the ornamental metals business is the phrase “wrought iron.” However, the confusion is...

Lido-Weld/Locktite® 326 Technical Data Sheet

Stair Rail End Post

Material Ready For Polish Flow Chart for Polishing Stainless Steel Pipe and Tube Use 120 Grit Zirconium Use 80 Grit...

WAGNER ADDS AUTOMATIC TUBE POLISHER FOR CIRCUMFERENTIAL FINISHING New polishing machine provides consistent finish of polished material and shortened lead...

I have been asked to share some metal polishing tips that I have picked up over my many years of...

#3 Finish — Also called Grinding, Roughing or Rough Grinding These finishes are coarse in nature and usually are a...

For round tube, pipe or bar that requires a Brushed Satin Finish. Note: When polishing, be sure to wear proper...

Brass Components to be welded must have “Class 1″ or “Special” cosmetic classification prior to acceptance of Customer Purchase Order....

There are many commercially available products that can be applied to copper alloys to accelerate the oxidization process. Many of...