Stair and Ramp Measuring Sheet
Stair and Ramp Measuring Sheet
- Home
- General Technical Questions
General Technical Questions
-
-
Wall Mounted Rails Return Back to the Wall and using end caps, Code Question
Q: Some of our wall mount rails return back to the wall where they terminate but may not actually touch.... -
Can a engineer use residential code for handrail to shorten the bottom return in a hotel and casino?
My understanding is that you can not apply an IRC reference to a commercial building. What are the details of... -
How do I keep aluminum from reacting with cement?
When aluminum components come into contact with cement or lime mortar, exposed aluminum surfaces should be painted with heavy bodied... -
How is the SA550 used?
The best way to mount a post is still to make the post longer and core drill for the post,... -
What is the difference between Pipe and Tube?
IPS stands for iron pipe size — a standard that was originally developed for fluid transfer but has also become... -
What is the difference between welding, brazing and soldering of aluminum?
Aluminum Standards and Data provides definitions for welding and brazing: Welding is the “joining of two or more pieces of... -
What is the difference between wrought iron and cast iron?
In contemporary usage, Wrought iron is metal that is “worked,” often on an anvil. Using the skills of a blacksmith, the metal is... -
How close can 2 EZ Sleeves sit next to each other?
4″ from any edge is the minimum distance. That applies to edge of concrete or edge of another hole. -
Can you bend 4.00″ OD aluminum tube?
We can bend 4.00″ OD aluminum tube. It would have to be annealed to T1 temper for bending, have at... -
Measurement Worksheet for Laying out Stair Rail Fabrication
Measurement worksheet for laying out stair rail fabrication -
Handrail Bracket Saddle Styles
“U” Style handrail brackets have universal saddle for use with round, square or extruded handrails. “D” &...